S Class 2 OPOS CAM Series

Back to S Class 2

Combining cutting speed with excellent accuracy

The vinyl cutters of the OPOS CAM Series are part of Summa's top-level S Class 2 range. OPOS CAM models come with Summa’s Tangential blade module and are upgraded with the OPOS Camera. These machines are suited best for sign professionals in need of a faster, and more accurate cut.

 

What does this camera technology do?

By combining advanced camera optics technology with our intelligent CameraControl recognition software, Summa’s OPOS CAM series significantly increases the speed of registration-mark recognition. Are you wondering what technology fits you the best? Find the differences between sensor and camera technology explained:

Read more

 

 

Specifications

Our teams are happy to advise you on a model that best suits your business.

MODELS S2 TC75 S2 TC160
CUTTING TYPE True Tangential with OPOS CAM and Drag Knife Cutting Mode Capability
CUTTING WIDTHS 76 cm (30 inch), Extended Mode: material width 158 cm (62.2 inch), Extended Mode: material width
CUTTING SPEED S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal
AXIAL ACCELERATION Up to 4 G
MAXIMUM ACCELERATION Up to 5.5 G diagonal
ALIGNMENT TYPE
  • OPOS CAM : Factory upgrade on all new Summa S Class 2 S75T, and S160T
  • Barcode job recognition
  • Up to 2 x 64 marks on the X-line
  • Y-Line compensation
TRACKING PERFORMANCE Within ± 0.1 mm (± 0.004 in.) on plots up to 12 m long (40 ft.); on rolls up to 760 mm wide/long
up to 4 m long on rolls over 760 mm wide
ACCURACY 0.2 % of movement or 0.25 mm, whichever is greater
CUTTING FORCE 0-600 grams of down-force, in 5 gram increments
DISPLAY LANGUAGE English; French; German; Dutch; Italian; Spanish; Polish; Portuguese
CONNECTIVITY USB; Ethernet
POWER REQUIREMENTS 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS S2 TC75 141 (W) x 68 (D) x 111 (H) cm (55.5 (W) x 26.8 (D) x 43.7 (H) in.) S2 TC160 225 (W) x 68 (D) x 111 (H) cm (88.6 (W) x 26.8 (D) x 43.7 (H) in.)
WEIGHT S2 TC75 69 kg S2 TC160 114 kg
OPERATING TEMPERATURE 59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES Summa GoSign software, Summa CutterControl & MacSign plug-ins, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades, Stand and Basket.
OPERATIONAL ACCESSORIES   Roll-up system for Summa S Class 2 160

Try our Solution Finder to find the cutter that fits your needs.