S3TC Tangential Camera cutters

a vinyl cuttEr that sees what othErs don’t

The S3TC brings camera guided tangential control to roll fed production, turning holographic, mirrored and specialty films into predictable, accurate output.

Talk to an expert

S3TC Series

High-volume cutting excellence

Some materials bend light. Some scatter it. Some stretch under heat or refuse to reflect a mark the same way twice.
These films expose the limits of traditional readers, and every misalignment becomes a reprint.

The S3TC removes that uncertainty. It pairs a tangential cutting head with fast, camera‑based mark detection.

The cutter reads the job with clarity, orients the blade with intent, and moves through complex films without hesitation.
Laminated prints, mirrored vinyls, holographics, UV‑printed graphics and specialty coatings all fall into a stable, repeatable workflow.

It is control, sharpened by vision.

Reach out now

Benefits

Explore the Benefits of our S3TC Tangential Camera CUTTERS

Camera intelligence for challenging films

Where reflective or low‑contrast marks confuse standard sensors, the camera reads with speed and precision.
Print distortions, specialty surfaces and long runs stay aligned.

Tangential authority on every cut

Blade orientation is fully controlled, not dragged, preserving detail, corners and small shapes even on thick or structured media.

Confidence in print and cut

The system recognizes marks quickly, compensates for shifts and delivers contour accuracy across the entire roll.
Jobs behave. Operators stay in flow.

Ready for mixed substrates

Whether your shop runs solvent, latex, UV, eco‑solvent or dye‑based prints, the S3TC keeps the workflow stable.
One cutter that adapts to many print technologies.

Cutting and creasing in one path

With dual‑tool capability, complex jobs finish without interruptions or changeovers.
Board‑like materials, packaging prototypes and multi‑step graphics flow through cleanly.

Direct-to-Film cutting

Designed for the realities of DTF production

Direct-to-Film printing delivers speed and flexibility, but the printed image remains fragile until transfer. Any friction, misalignment, or uncontrolled blade movement can damage the print before it ever reaches the textile. The S3 TC75 is engineered to remove those risks from the DTF workflow.

Its tangential cutting technology delivers clean, controlled cuts on single-layer PET film without dragging or tearing the print.

The integrated camera reliably reads white registration marks on translucent media, allowing the film to be cut with the inked side facing the blade while avoiding contact with machine surfaces.

Combined with a frictionless roll feed and dedicated roll-up system, the S3 TC75 keeps delicate DTF prints stable from start to finish, enabling consistent quality, longer runs, and unattended production with confidence.

Sizes