GoProduce Flatbed Edition - V3.4

Released: February 24, 2026

New features

• Added support of V-series devices

• Added device configuration and possibility to auto detect flatbed devices

• Added device monitor for V-series devices

• Moved plot to file configuration from output action to device configuration

• Added possibility to select device type in plot to file device configuration

• Changed ribbon UI to support multiple types of inserts

• Added CF2 file format support

Improvements

• Only convert driver tool names to method names for OXF and SGP file types

• Added “Alternate method names” property to methods

• Added separate “Tools” button to allow editing the list of available tools without having to redo device configuration

• Show warning message when mark is not found

• Added application log file to workflow backups

• Sync newly added tools to already existing materials

• Added validation of valid inserts before reading marks

• Changed storage location of workflow backups to Local AppData folder instead of the My Documents folder

• Added “Fit working area to objects” property to import action to enable or disable importing a file using absolute coordinates

Fixed Issues

• Fixed issue where HPG(L) files have the wrong resolution when twin x mode is disabled

• Fixed issue where OXF header would always show

• Fixed issues where some SVG files would not import correctly

• Fixed issues with routing sorting

• Fixed an issue where exceptions could occur when using barcode import

• Fixed issue where PDF text shapes were not imported when importing by spot color

• Fixed issue where data was missing when importing some iCut files

• Fixed issue where routing path disappears after searching for regmarks/drill holes

• Fixed issue where sorting would not work correctly for open objects

• Fixed issue where logging of workflow data could fail when files are already in use

• Fixed multiple cases where GoProduce could crash in some situations during a workflow

• Fixed issue where waste cut would sometimes cut through shapes

• Fixed issue where communication logger would stop logging after first action

• Fixed issue where routing path would sometimes not update

• Fixed issue where camera profile of imported SGP file is not selected on import

• Fixed issue where configured feeder settings would reset whenever the feeder configuration window was opened

Recommended Firmware:
F Series Firmware MD9974

Download:
Go to Software / Firmware, then select 'software' and 'flatbed cutters'.

GoProduce Flatbed Edition - V3.3.1

Released: September 29, 2025

Improvements

• Changed: Minimum allowed mark size is now 1 mm.

Fixed Issues

• Solved: Bevel-cut cutting path was showing a full arrow instead of a half arrow in job view when offset was used.

• Solved: Updated bevel-cut cutting path offset was not shown in the job view.

• Solved: Cutting direction was incorrect when using burr-free compensation mode in combination with cutting from the back side.

• Solved: In certain cases, the 'Optimize Start Point' function in GoProduce take significantly long time on processing.

Recommended Firmware:
F Series Firmware MD9974

GoProduce Flatbed Edition - V3.3.1

Released: June 12, 2025

New Features

• Added “Scale job” action. 

Fixed Issues

• Solved: GoProduce can crash upon “Break at intersections” with certain jobs.

Recommended Firmware:
F Series Firmware MD9974

GoProduce Flatbed Edition - V3.3.0

Released: April 8, 2025

Improvements

• Added “Angle” parameter for segment connector.

• Changed “Y” to “Y offset” in the “Set job origin” action.

• Added option to exclude layers when adding drillholes in the Import action.

New Features

• Added support for Sheet Feed 75 feeder.

Fixed Issues

• Solved: Bevel cut path not shown on import.

• Solved: Using "Search drill holes" on "Regmark" layer caused drill holes to change into regmarks.

• Solved: The "Size" parameter to add drill holes to an OXF was not saved.

• Solved: Some PDF files with vertical text orientation failed to import.

• Solved: Missing country "Cyprus" in customer information.

• Solved: Pre-installed action sets that get removed have empty filename in "Recovery" folder.

Recommended Firmware:
F Series Firmware MD9974

GoProduce Flatbed Edition - V3.2.0

Released: November 27, 2024

Improvements

• Improved order of detecting marks for specific jobs to avoid mark prediction issues.

• Use “XXXXXX-XXXXX" as serial number place holder for GoData and backup logs when using "Plot to file".

• Also execute Cleaning pass with "as designed".

• Added backward compatibility for GoData API changes.

New Features

• Support Corrugated Tool.

• Offset property for Bevel-cut Tool.

• Grain direction for V-cut gap.

Fixed Issues

• Solved: Imported PDF's with kerning information can have misalignments.

• Solved: multi-pass routing jobs with multiple segments can change direction on the second or third segment.

• Solved: backside cutting with tandem mode and medium/high consistency doesn't work correctly.

Recommended Firmware:
F Series Firmware MD9974

GoProduce Flatbed Edition - V3.1.0

Released: August 23, 2024

Improvements

• GoProduce software for the F Series is now called "GoProduce Flatbed Edition".

• GoProduce Flatbed Edition is now 64-bit.

• Fixed-size compensation: better angle calculation for shapes where the height is different from the width.

• Add "regmarks" option for ZCC and i-Cut import to optionally import regmarks and to clarify that the "Size" property is meant for regmarks.

• Output option to omit waste cut on the first segment.

New Features

• Added the "GoConnect" feature, which can be activated via a separate license.

• Added support for the "IMC Polar 750 Sheet Feeder" to "GoConnect".

• Added the "Load material" action to load the initial sheet of an automatic feeder.

• New predefined action sets for automatic feeder support are installed under "My Documents" and can be imported from GoProduce.

• Added the "Drill holes" feature for routing.

• Added the "Lead-in/lead-out" feature for routing.

• Added the "Drill-hole" method to the default material manager.

• Added "Twin X" checkbox option for PLT/HPGL/DMPL import to be able to import these files as an F Series file or as a Twin X file.

• Added basic and advanced logging features for better support. From the "General" ribbon tab, you can change the logging settings and exchange the workflow logs via local file save or "Summa Cloud Storage".

• Added support for a new product key feature "Showroom Version".

Fixed Issues

• Solved: shapes could sometimes have a wrong position in specific DXF files.

• Solved: shapes could sometimes have a wrong position in specific PDF files.

• Solved: Method and tool settings are sometimes lost when opening multiple native files.

• Solved: Order of layers are not saved after changing the layer order, saving the job and reopening it.

• Solved: No visual feedback on routing path when using "As designed".

• Solved: Certain activations like Pro Pack trial versions are, in some cases, reset after restart.

• Solved: Actions in an action set operation on layers prevent the action set from being executed when the layer method is not present. However, this is not always desired. Instead, these actions are now skipped.

• Solved: When the output is finished, the parsing error of "Joblog.csv" is sometimes needlessly logged to SummaGoProduce.log.

• Solved: In some cases, GoProduce can crash on customer registration when trying to retrieve the list of possible countries.

• Solved: Jobs are sometimes cut at the wrong position with "medium" sheet consistency.

• Solved: Polishing pass adds extra lines in some cases.

Recommended Firmware:
F Series Firmware MD9974

GoProduce Flatbed Edition - V3.0.0

Released: March 22, 2024

New Features

• GoData BETA support.

• New "Clean up" actions, "Add chamfers", and "Add rounded corners".

• New compensation method "Cut to frame / Follow print" that produces cut shapes with the same defor-mation as the print but with a fixed size equal to the size in the design.

• Anchor point option for "Cut to frame" compensation modes with 9 options to specify alignment with the print.

Improvements

• Fixed size (smart compensation): cut shapes are now only aligned in the X direction so the cut is more evenly distributed on the left and right of long shapes.

• Renamed compensation modes.

• Optimizations on advanced logging.

• Added checkbox "Omit inner shapes" for Waste Cut.

• Shows a proper error message when failing to import a native file that was created with a newer version of Go-Produce.

Fixed Issues

• "Align with sheet edges" workflow slowing down a lot after > 10-13 jobs.

• Loss of accuracy when converting circular shapes to bézier curves on DXF import.

• PDF export button should only be visible when Pro Pack is activated.

• Unexpected error in output screen with spe-cific file from customer due to rounding error.

• TwinX import action property is shown even when Pro Pack is not activated.

• Modal dialogs should stay on top to avoid us-ers thinking that the main application hangs.

• Drill-hole method not automatically added to material manager when upgrading from V2 to V3.

• Reduce nodes can cause an unexpected error in some cases.

Recommended Firmware:
F Series Firmware MD9974