Summa GoProduce - Version 1.11.6

Released: May 24, 2023

Fixed issues

• Solved: “Marks are too far apart in X direction” error, when trying to output Print & Cut jobs with only 3 marks.
  

Summa GoProduce - Version 1.11.5

Released: February 07, 2022

Fixed issues

• Solved: DXF import by colour doesn't always work correctly.

• Solved: GoProduce license has to be reactivated from time to time.

• Solved: “Reduce nodes" action can cause unexpected errors in the output of the job.

Summa GoProduce - Version 1.11.4

Released: June 17, 2021

Fixed issues

• Shapes can be missing in output on segment boundaries

• Part of a line or curve can be missing after segmentation

• The first of two cut-off lines sometimes starts at the edge of the media area which causes the knife to crash on the media

• Straight closed lines are not cut

• Camera preview not updating on PC's with Intel Iris Xe Graphics card

• Material XML files of GoProduce version 1.6 are not imported correctly.
  

Summa GoProduce - Version 1.11.2

Released: February 02, 2021

Improvement

• Cut off margin of 50mm instead of 10 mm

Fixed Issues

• Solved: GoProduce can be unresponsive for 5s after moving to a registration mark

• Solved: Fatal memory errors can occur when GoProduce is detecting marks with the camera

• Solved: V-cut gap should be 0 when bevel-cut is enabled

• Solved: Wrong origin when importing files with rotation and with width/height < 100 mm

• Solved: Tool names are not translated

• Solved: Actions in action set editor are not translated

• Solved: Mark types are not translated

   

Summa GoProduce - Version 1.11.1

Released: November 27, 2020

Improvements

• Default edge profile is now assigned to all materials in the default material manager.

• Assign first available edge profile by default when creating a new material.

Fixed Issues

• Solved: Not possible to assign tools to methods without selecting one of the router tools, show "tool not selected" error message.

• Solved: Sometimes "No camera profile has been selected!" error occurs even when media edge profile and mark profile has been set in the material.

• Solved: GoProduce can be unresponsive for 5s after moving the camera head with the arrow buttons/keys.

Summa GoProduce - Version 1.11

Released: October 26, 2020

Improvements

• New import option to specify DXF units (auto, inches or mm).

• Margin option for "break at intersections".

• Materials have a tool priority list instead of one default tool.

• Adjusted default material manager with tool priorities.

• Users can now customize the materials by selecting the router tool(s) they have.

• Inserts can be assigned to multiple tools.

• Backwards compatibility with old material/material manager .xml files, all default tools are set first in the tool priority list.

• Legacy inserts with the same name and different tools are merged at startup for backwards compatibility.

• Unassigned layers are assigned to the first method of the material at import.

• Layers show object color instead of method color when importing a file with separate layers "By color".

• Different color conversion from CMYK to RGB with separate layers "By color".

• Smoother cutting of shapes containing very small bezier curves.

• Job size dependent distance between edge detection points for more accurate cutting from the back side.

• Polish translations are now available.

• Installation of default action sets using Barcode option under My Documents.

• Removed default action sets that use Barcode option from default configuration.

• Barcode option features are hidden in UI when Barcode option is not activated.

• Title bar now shows days left of trial.

• Removed list of contributors.

Fixed Issues

• Solved: Cut off starts next to media which can cause the knife to crash.

• Solved: Digital signature of USB driver installer is expired.

• Solved: Some jobs can have missing shapes in the output preview and cut data with segmentation set to "minimize cut through".

• Solved: Missing shapes when importing some DXF files.

• Solved: Crashes on output with SGP file containing shapes with size 0.

• Solved: Edge detection for back side cutting hangs when top left/right edge is not found immediately.

• Solved: End of segment command should be sent before feeding or asking to replace a sheet.

• Solved: Edge profiles not imported automatically when installing GoProduce over an older version.

Summa GoProduce - Version 1.10.28

Released: August 21, 2020

Fixed Issues

• Solved: Wrong feed length and missing shapes with "minimize cut through" segmentation.

Summa GoProduce - Version 1.10.27

Released: June 2, 2020

Improvements

• Changed "backside" to "back side".

Fixed Issues

• Solved: "File is corrupt" error when importing DXF file.

• Solved: "Unexpected error occurred" when feeding a segment with minimize cut through.

Summa GoProduce - Version 1.10.26

Released: April 28, 2020

New Features

• Backside cutting with sheet edge detection for single segment.

• Sheet consistency option for faster workflow when cutting sheets that fit within the working area.

• New Creasing Tool D50 R1.5 H0.6.

• Skip mark button in output.

• New bits in default material manager.

• New EOT tool property "EOT frequency".

• New RM and HT RM tool property "blade compensation".

Improvements

• Better prediction of mark positions for jobs with different deformation in X and Y.

• Different choice of print & cut segmentation according to compensation mode.

• Improved fixed size compensation with multiple segments.

• New materials automatically contain the default material thickness.

• Improved look&feel of material manager.

• Automatic choice of online or offline activation in the license wizard.

• Self-learning feed margin with multiple jobs on roll.

• Smarter skipping of marks.

• Skip half of margin feed when possible (cut-only and print&cut) with cut-off enabled.

• Legacy folder under My Documents containing legacy action sets, materials and inserts.

Fixed Issues

• Solved: Head doesn't move to origin after importing a job with the handheld barcode scanner.

• Solved: Some shapes not imported from DXF.

• Solved: Print&cut jobs smaller than the media area are segmented.

• Solved: Wrong mark prediction of second mark of second roll job/second segment.

• Solved: Sometimes ghost lines can occur in the preview that are also cut by the device.

• Solved: GoProduce can be considered untrustworthy by some antivirus programs.

Summa GoProduce - Version 1.8

Released: November 12, 2019

Improvements

• Changed Y margin of cut-off from 25mm to 100mm.

• "Duplicate method" button now gets disabled in Edit Material window when all methods are used.

• "Remove method" button now gets disabled in Edit Material window when only one method is present.

• "Remove material thickness" button now gets disabled in Edit Material window when there is only one thickness present.

• A new method is now automatically added when creating a new material.

• A new thickness is now automatically added when creating a new material.

• New regmark camera profiles have the same default settings as the "Default" camera profile.

• Subwindows are opened with a size that fits on the screen.

• A created RIP xml now also contains methods created by the user.

• It is now possible to import a collection of action sets in an XML file.

• Rom rev 31 is now required for communicating with the F series.

• Changed sample PDF file to meet the SDK.

New Features

• Import of AutoCAD DXF files (versions 12, 13, 14, 2000, 2004, 2007, 2010, 2013 (AutoCAD 2013-2017), 2018).

• Added scaling option in % to import action.

• Added "Reset Origin" option to "Set working zone" action.

• Korean translations are now available.

• Added a new material "Squid" to the Material Manager.

Fixed Issues

• Solved: GoProduce could crash after detecting all registration marks, especially with backside cutting.

• Solved: PDF UserUnits option was not supported.

• Solved: In some cases the tool was in down position when moving to the first shape of a layer.

• Solved: After reading a barcode, no error message was shown when the barcode file was not found.

• Solved: GoProduce crashes when importing a file with no data.

• Solved: Backside cutting with router doesn't work with marks and inserts that have the same diameter.

• Solved: Regmark method didn't get translated.

Summa GoProduce - Version 1.7.21

Released: September 6, 2019

New Features

• Italian translations are available.

• German translations are available.

• Spanish translations are available.

• Chinese translations are available.

• French translations available.

• Segment connector between segments. (selectable per tool)

• Cut-off between jobs, the tool assigned to the thru-cut method will be used (the one in the design or the default tool for thru cut for the selected material)

• Cross marks added to the type of registration marks that can be used.

• Updated Material Manager - new materials + new bits (V-groove, compression bit).

• Revision number in the title bar.

• Add X and Y as labels to the ruler to indicate machine origin.

• "Remove layer" action added.

Improvements

• "Reduce nodes" added to "Clean-up design" action set

• "Close objects" improved when cutting rectangle rasters.

• "Search regmarks" removes registration marks on top of each other.

• Improved error messages

• Send material thickness to the machine before cutting, so that the up-position of the installed tools is automatically set high enough - new firmware needed.

• Disable "duplicating objects" for jobs with registration marks.

• Automatically restart camera communication if communication fails due to interference during segmented jobs.

• The activation key can be filled in manually.

• For the dealer version, do not ask for a serial number of the machine during installation.

• Version number added to the material manager, action setlist, camera profiles list, this to allow an update of new materials, new action sets, new camera profiles

• Auto-detection of space between copies when "copy distance" is set to 0. The distance between copiers must be between 20 and 200 mm. If copy distance is non-zero, then a 20 mm margin is allowed on the specified value.

• Maximum value of 500 mm for space between copies.

• Option to turn off Tooltips.

• Remove "Feed Fixed Length".

• Combine layers with the same name when importing a file (needed for GMG Printfactory)

Fixed Issues

• Solved: Compensation for objects outside of registration marks was sometimes not correct.

• Solved: Bottom Buttons were not visible when job had too many layers.

• Solved: Routing lines were sometimes missing with "keep inner shape" or "hatch fill"

• Solved: "Job doesn't fit on the table" when trying to output a single vertical line

• Solved: Wrong mark prediction in the first segment of the second job with "On end of job" set to "feed job length" with multiple copies.

• Solved: Wrong prediction of marks in tandem mode.

• Solved: "Fixed size" compensation not working correctly when the job contains single lines.

Summa GoProduce - Version 1.6

Released: April 11, 2019

Improvements

• Log fatal errors under GoProduce folder in My Documents.

• Round imperial units to 3 decimals when exporting material manager to PDF.

• Button to reset to factory defaults for action sets.

• Disable "Transform" on the selection tab for print and cut jobs.

• Set rotational speed for "Polished Finish" to 48.000 rpm instead of 25.000 rpm.

• Use "Keep inner shape" as default for Bevel-Cut methods.

• Add a fixed country list instead of allowing to type the country in a text field when registering a new customer.

• New camera profile for backside cutting for thick materials.

Fixed Issues

• Barcode import does not search for SGP files.

• Overcut elimination for HT RM is wrong, it uses the routine like for the single edge tool.

• While cutting the registration marks for backside cutting, marks can be completely misshaped with long diagonal lines.

• Hatch lines can mess up original shape when coinciding with the edge of the outer routing path.

• Space occupied by bit no longer visible after undo.

• Regmark method displayed as Regmar k in the ribbon.

• Flute direction and offset do not work.

• Multipass for heavy duty does not work.

• The position of registration marks is not always correctly predicted in segments after the first one.

New Features

• Add a sample file.