Summa GoProduce Laser Edition - Version 3.3.0

Released: October 6, 2025

New Features

• Added "Scale job" action.

• Added support for importing CF2 file format.

Improvements

• Possibility to add alternative names to a method

Fixed Issues 

• Solved: Sometimes there are less stitched frame rows than there have been received from the vision camera, potentially causing errors in the detection and cutting accuracy.

• Solved: Missing cut lines in certain trace&cut jobs of customers because of the image not being traced entirely to the top of the image.

• Solved: Some PDF files with vertical text orientation failed to import.

• Solved: Imported PDFs with kerning information can have misalignments.

• Solved: Pre-installed action sets that get removed have empty filename in "Recovery" folder.

• Solved: Changed "Y" to "Y offset" in "Set job origin" action.

Summa GoProduce Laser Edition - Version 3.2.1

Released: June 12, 2025

Fixed Issues

• Solved: L3214 and GoProduce LE can hang after some time with complex jobs that contain more than 32768 steps.

• Solved: GoProduce LE can crash upon “Break at intersections” with certain jobs.

Summa GoProduce Laser Edition - Version 3.2.0

Released: April 30, 2025

New Features

• Support Cut On The Fly for L1810 Gen 2.6 devices.

Improvements

• Added "Angle" parameter for segment connector.

• Added "Plot to file" settings to device configuration.

• Removed "Plot to file" settings from output action.

• Improved error reporting on received and stitched amount of frames from the vision camera.

• Improved visibility and availability of "Device" ribbon tab with less flickering.

• Changed power test sample file to fit inside the working area size of the L1810-26.

• Improved error handling in trace&cut workflow related to media area.

Fixed Issues 

• Solved: Sometimes there are less stitched frame rows than there have been received from the vision camera, potentially causing errors in the detection and cutting accuracy.

• Solved: Missing cut lines in certain trace&cut jobs of customers because of the image not being traced entirely to the top of the image.

• Solved: Some PDF files with vertical text orientation failed to import.

• Solved: Imported PDFs with kerning information can have misalignments.

• Solved: Pre-installed action sets that get removed have empty filename in "Recovery" folder.

• Solved: Changed "Y" to "Y offset" in "Set job origin" action.

Summa GoProduce Laser Edition - Version 3.1.1

Released: February 14, 2025

Improvements

• Remove check on amount of arrived frames from the vision camera, since it seems to sometimes report errors even when all frames have arrived.

Fixed Issues

• Solved: Trace&Cut hangs on L1810-25 devices.

• Solved: Vision camera "FrameNumbers" log files don't contain the correct serial number of the individual cameras.

Summa GoProduce Laser Edition - Version 3.1.0

Released: November 12, 2024

New Features

• L1810 Gen 2.6 device control and monitoring in a separate ribbon tab. 

• L1810 Gen 2.6 device action: feed.

• L1810 Gen 2.6 device action: set media area. 

• L1810 Gen 2.6 device action: change user settings. 

• L1810 Gen 2.6 device action: show machine and tool info. 

Improvements

• Improved order of detecting marks for specific jobs to avoid mark prediction issues. 

• Vision camera error handling improvements. 

• Recover vision camera connection automatically without losing buffer data if the connection gets lost and the device is not feeding. 

• Prevent GoProduce Laser Edition from starting when Summa GoCare is running. 

• Optimizations on import PLT/HPGL/DMPL files. 

• Advanced logging improvements: better backup of cutlog and added device communication log file. 

• Disable service mode for L1810 Gen 2.6 at the start of each action and/or on making connection with the device. 

Fixed Issues

• Solved: "Unexpected error" occurs when outputting a single segment print&cut job with multiple # jobs.

Summa GoProduce Laser Edition - Version 3.0.0

Released: August 23, 2024

New Features

• GoData BETA support.

• New compensation mode "Cut to frame / Follow print" that produces cut shapes with the same deformation as the print but with a fixed size equal to the size in the design.

• Anchor point option for "Cut to frame" compensation modes with 9 options to specify alignment with the print.

• New "Clean up" actions, "Add chamfers", and "Add rounded corners".

• Supports new product key feature "Showroom Version".

• Added advanced logging and various logging improvements.

Improvements

• Better reporting of vision camera connection issues. In this case, the entire workflow needs to be restarted because all buffer data is cleared on reconnecting with the vision camera.

• Detects media area changes during trace and cut workflow.

• Disabled "Retry" in output in case of a Trace & Cut workflow.

• Renamed compensation modes.

• Added checkbox "Omit inner shapes" for Waste Cut.

• Faster mark recognition with vision camera.

• Don't redetect marks on the segment borders or after a prefeed when using the vision camera. This is only useful when using the head camera.

• Shows a proper error message when failing to import a native file that was created with a newer version of GoProduce.

• Ensured uniformity of date stamp (DD/MM/YYYY) and time stamp (hh:mm:ss, 24h) formats in the joblog.csv file.

• "Add regmarks" option for ZCC and i-Cut import to optionally import marks and to make it more clear that the "Size" property is meant for regmarks.

• Added "Motion detection" option to "General" ribbon tab to disable motion detection for camera recognition. This can cause unwanted delays on head cameras with a lot of noise.

• Filters Trace jobs with "Minimum objects size" before adding the contour offset instead of after. This to prevent an outwards offset from merging small objects with large objects.

• Changed "Contour offset" distance property in "Trace" action to "Contour offset" property with options "Inwards" and "Outwards" and an additional "Distance" property. This to allow an outwards offset as well.

Fixed Issues

• Loss of accuracy when converting circular shapes to bézier curves on DXF import.

• PDF export button should only be visible when Pro Pack is activated.

• Modal dialogs should stay on top to avoid users thinking that the main application hangs.

• Certain activations like Pro Pack trial versions are in some cases reset after restart.

• Shapes are not always traced correctly when the distance between trace lines is the minimum allowed value of 10mm.

• Joblog.csv not always updating correctly with Trace & Cut because of old entries in a different date and time format.

• "Line not found" error when reading barcode of sample file.

• Sometimes a "Line not found" error can occur when measuring the position at the left of the barcode.

• When an error occurs while cutting on the L3214, it does not cancel the job and the machine remains in a busy state.

• Order of layers is not saved after changing layer order and saving to native format.

• Layer actions block the continuous flow in case of failure, for example when a method is not found.

• Wrong position of some shapes in specific PDF file.

• In some cases GoProduce LE can crash on customer registration when trying to retrieve the list of possible countries.

• Unexpected error in output screen with specific file from customer due to rounding error.

Summa GoProduce Laser Edition - Version 2.2.1

Released: December 8, 2023

Changes to 2.2.1

Improvements

• Fixed size: better angle calculation for shapes where the height is different from the width.

• Fixed size (smart compensation): cut shapes are now only aligned in the X direction so the cut is more evenly distributed on the left and right of long shapes.

Fixed Issues

• Solved: issue in interpretation of Vision Camera calibration causing the cut to shift after a feed.

• Solved: "Invalid number of barcode characters" can occur in some cases when reading barcode with the vision camera.

Summa GoProduce Laser Edition - Version 2.2.0

Released: September 9, 2023

Changes to 2.2.0

New Features

• "Backup logging" functionality in "General" ribbon tab for troubleshooting.

• Added Korean language and translations.

Improvements

• Doesn’t allow to confirm device configuration if serial number is absent or invalid (unless it is a plot to file device), and shows info message "Invalid device serial number!".

• Now checks the minimum rom revision at device configuration. Shows info message "GoProduce LE requires at least firmware revision XX" if not high enough.

• Changed minimum rom revision to 3007 for L3214 and to 8 for L1810gen2.

• Logging of images when reading barcode if "LogLevel" application setting is set high enough.

• Faster timeout on mark recognition with the vision camera.

• Show proper error message when an user tries to import a material manager using the "import" button instead of using the "restore" function.

• Slightly increased width of virtual camera window for vision so that there's the same amount of margin for mark detection in both directions.

• More intelligent calculation of which marks to read to accurately do a prefeed.

• Fixed size compensation: improved center calculation for segmented shapes.

• Marks necessary to calculate prefeed are now sorted "by main direction (vertical)" instead of "by nearest object", resulting in better mark prediction in some cases.

• Fixed size compensation: improved center of shape calculation for shapes with noticeable difference in deformation at opposite sides of the shape.

• Optional property to "Crop to page size" when importing PDF files where figure is outside of the MediaBox to only import the visible part.

• The possibility to request to enter a job name on the "Load material" action which will be used in the "Joblog" if no job name is available, for example when using the "Trace" action.

• Uses slightly smaller region when searching the barcode line with the camera for stability.

• Added hidden contrast setting to barcode profile to cope with white space being detected as barcode line.

• Job time logging and job identification for Trace&Cut.

• Output option to omit waste cut on first segment.

Fixed Issues

• Solved: "Rendering" option under "General" tab is no longer working correctly and always remains on "Hardware" after application restart.

• Solved:" Select layer" action does not work with native file types (.sgsj, .sgpj, .sglj).

• Solved: "An unexpected error occurred" when cutting print&cut jobs containing vertical lines with "Fixed size (smart compensation)".

• Solved: "Marks are too far apart in X direction" error can occur randomly when trying to output a print&cut file.

• Solved: Using the"Restore" function to restore action sets with an XML file that does not match the expected XML results in an empty action set being "restored".

• Solved: GoProduce LE license is not activated for all users on a pc but only for the active user.

• Solved: Properties that use the DoubleUpDown control will incorrectly display a red border indicating that the value is exceeding the limit even when it's still an acceptable value when using "inch" or "cm" as unit.

• Solved: too long prefeed in some cases because of using X and Z axes with vision calibration.

• Solved: Shift between segments with "Fixed size" compensation because of using X and Z axes with vision calibration.

• Solved: Creating zip archive on "Feed and roll scan" can take too long if the previous job was very long.

Summa GoProduce Laser Edition - Version 2.1.0

Released: March 2, 2023

New Features

• Export to PDF (PRO PACK).

• Page select on import for multipage PDF documents.

• Added USB driver vision camera to installer.

• Added “Trace and Cut.pdf” sample file.

Improvements

• Support segment connector for Trace & Cut.

• Minimum allowed value for segment connector of 0.1 mm.

• Support CCT format for serial numbers.

• Add application settings .xml files under ProgramData in order to zip backup archive, created on "Load" action for better troubleshooting.

• Sample file to setup the power to cut a material.

• Rename "Zund" and "Esko" titles to "ZCC" and "i-CUT".

• Changed minimum width and length for "Plot to file" to 100 mm, changed maximum and default width and length to 50 m.

• Different error message than “Predicted mark lies outside of media area" when barcode detection tries to move outside the media area.

• Slightly improved mark prediction to solve inaccuracies with jobs having a "bowing" effect.

Fixed Issues

• Solved: In some cases, GoProduce LE can crash when entering the serial number during activation.

• Solved: Opening a .sgsj file will still show the previous file name as job title instead of the actual .sgsj file name.

• Solved: When executing a print & cut job, "Apply" mark can be available even though there's no mark detected.

• Solved: Mark detection can get stuck, jumping endlessly from one position to another.

• Solved: Saving PDF file as a .sglj file while the property "Separate layers for PDF" is set to "by color" and re-opening the newly saved .sglj file would result in invisible lines.

Summa GoProduce Laser Edition - Version 2.0.1

Released: January 3, 2023

Changes to 2.0.1

Improvements

• Support multiple activation licenses for production.

• Increased max value of margin of clean-up actions (Reduce nodes, Remove double lines/objects, Break at intersections, Close objects) to 3 mm (3/32 in).

• Trace&Cut: faster tracing by skipping seed points that would have the same result as seed points that were already used. Skipped seed points are shown in a different colour.

• "Colour bar" option in "Trace" action to cope with long printed colour bars at the sides of the job.

• For Trace&Cut, seed left and right on the first segment to cope with colour bar printed at one side of the material.

• Changed default park distance to 750 mm (29,53 in) in "Load Material" action and default action set "Feed and roll scan".

Fixed issues

• Solved: Zund and Esko options are not hidden in the Import Job action properties window when Pro Pack is not activated.

• Solved: "Close objects" action sometimes chooses the wrong objects to close, for example in a raster of rectangles.

• Solved: Wrong regmark size when importing Esko files which are defined inches.

• Solved: GoProduce LE 2.0.0 can crash on activation because of missing QrCoder.dll in installation folder.

• Solved: During Trace&Cut, only cancels after "Tracing" step when cancel was pressed when "Filtering" was busy, which might cause a long time before the process is cancelled.

• Solved: For Trace&Cut, sometimes unwanted horizontal lines are generated at the bottom of a scan that doesn't cover the complete working area.

• Solved: Waste cut cutting through shapes on the first segment of a trace&cut job.

• Solved: Wrong (circle) regmark position when importing ZCC or CUT file.

Summa GoProduce Laser Edition - Version 2.0

Released: September 9, 2022

Changes to 2.0

New Features

• New supported file formats for import action: .SVG , ZCC (Pro Pack) and CUT (Pro Pack).

Improvements

• Don't go into fatal error when an error is reported by the L3214.

• Improved nearest object sorting: now uses current position as initial start point instead of device origin for each segment, resulting in less up movements.

• Reuse marks of last segment of previous job to predict marks of first segment of next job in barcode workflow.

• Allow manual intervention when Predicted mark lies outside working area" error occurs instead of going into fatal error."

• More optimal movements when using cut-on-the-fly and waste cut.

• Fixed size compensation improvements for segmented shapes.

• Added option No action" on end of job."

• Now only imports first page for multipage PDF documents.

• Segmentation margin which allows 5% scaling and 1° angle.

• Working area is now shown on top of scan images to make clear where the user can move the virtual camera window and the difference in working area with Cut-on-the-fly.

• Increased max value for Media edge offset" in "Trace" action from 100mm to 150mm."

• Separate Media edge left offset" and "Media edge right offset" options instead of one single "Media edge offset" option in the "Trace" action."

Fixed issues

• Solved: Waste cut issues with print&cut jobs that have open shapes inside closed shapes.

• Solved: Bad mark prediction with scaled and/or rotated jobs.

• Solved: Start of job (L3214) or IN command (L1810Gen2) only sent after a prefeed.

• Solved: Start of job (L3214) or IN command (L1810Gen2) not sent in case of prefeed of a segment without cut data.

• Solved: Cut-on-the-fly not working on the L3214.

• Solved: Median filter only filters in horizontal direction.

• Solved: First segment of print&cut jobs is not cut correctly with Cut-on-the-fly.

• Solved: Barcode reading issues.

• Solved: Prefeed can be too long for jobs with bowing effect, resulting in mark prediction errors. Reading more marks in the first segment prior to the prefeed solves this.

• Solved: GoProduce LE sometimes misses the first mark after a prefeed of jobs with a bowing effect.

• Solved: Line not found" when reading barcode on mesh material."

• Solved: Corner not found" when reading barcode on mesh material."

• Solved: Set cutting speed command is missing in HPGL cutlog of L3214.

• Solved: “Predicted mark lies outside of media area" error when trying to read the next barcode with COTF.