Release notes - GoCare Software

Summa GoCare - Version 1.4.2

Released: February 5, 2024

---

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Improvements

• Add proper message to Vision Camera - Calibrate pixels " if no previous tests are done yet and no VisionCamera.xml is created."

Fixed Issues

• Camera view missing on Vision Camera - Calibrate pixels"."
• Vision scans input and output folder not generated/missing causing an error in Vision Camera - Calibrate pixels"."

 

Download:
Go to Software / Firmware, then select 'software' and 'laser cutters'.

Summa GoCare - Version 1.4.0

Released: December 13, 2023

---

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Improvements

• Add Beckhoff license file when doing a L3214 backup in "TECHNICIAN" mode.
• Bypass pressing next after verifying PLC has restarted automatically by detecting the current state. 
• Change plc to PLC in translations.
• Remove ip address user input and permanently set 10.137.1.110 for firmware upgrade of a L3214.

Fixed Issues

• Issue Fix: L3214 device backup is adding an ads error to the log file even though the backup is working properly.

 

Download:
Go to Software / Firmware, then select 'software' and 'laser cutters'.

Summa GoCare - Version 1.3.1

Released: July 11, 2023

---

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

Fixed Issues

• Backup of L3214 register is wrong due to decimal written as comma.

 

Download:
Go to Software / Firmware, then select 'software' and 'laser cutters'.

Summa GoCare - Version 1.3.0

Released: May 24, 2023

---

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

New features

• Ribbon button added to edit service settings.
• Added USB driver for the vision camera and IC Capture 2.4 to the installer.

Improvements

• Added extra step in pixel calibration to verify calibration.
• Extra step added to mechanical adjustment to put camera's perfectly perpendicular to the conveyor with a plump bob.
• Extra window added to place paper on the machine during din test or circle test.
• Message changed in calibrate pixels to "Stick 2 layers of tape".
• Support CCT format for serial numbers.
• Set number of passes in material manager default on 2.
• Default minimum power set to 10%.
• Window added to mechanical adjustment for levelling the cameras.

Fixed Issues

• When redo the pixel calibration, the scanned image is black.

 

Download:
Go to Software / Firmware, then select 'software' and 'laser cutters'.

Summa GoCare - Version 1.2.0

Released: September 7, 2022

---

Summa GoCare is developed for technicians to provide technical support on the Summa products. 

New features

• Backup to Azure storage.

Improvements

• Change message in pixel calibration to "Feed center of last applied tape to the cutter head".
• Reduced height for drawing paper positions to make it easier to remove the tape.
• Update drawing paper positions in mechanical alignment test for the camera alignment test.
• Do not talk about 'Azure', instead use 'Summa cloud storage".
• Show proper message when no internet connection is available on backup to or restore from the Summa cloud storage.
• Remove “Check and report” in user mode.
• Remove “new action set” in the documents folder.
• Remove event logger in user mode.
• Remove material manager in user mode.
• Remove tool settings in user mode.
• Change default name of backup of device and vision to local the same as cloud backup filename.
• Remove image of laser tool in tool properties similar to GoProduce LE.
• Firmware upgrade done message changed to “ Wait until upgrade is complete to reboot device and press finish.”.
• Update default test sets for service and factory mode.
• Cloud backup/restore improvements:
• Filename of factory backup: add “-Factory.xml”
• Filename of user backup: add "-YYYY-MM-DD.xml"
• Show drop down box on restore to select proper backup
• What if no backup exists? Show proper message.
• Sending files larger then 10kB failed for example the DIN test.
• Check for valid serial number in the machine LXXXXX-XXXX before running a test.
• When loading the tape, use a scan feed instead of a normal feed. Makes the trigger error pop up faster.
• Switch "Head Camera - Set camera focus" and "Head Camera - Calibrate" order.
• Add vision camera backup action to user mode.
• Rename "Move files to GPLE" to "Update GPLE".
• Change description in "Vision Camera - Set camera order" and "Vision Camera - Set camera focus".
• Add browse folder button to action property Directory.
• Add extra offset to the vertical alignment in vision camera alignment (100px).
• Change "Move files to GPLE" category to "Vision camera".
• Rename "Move files to directory" to "Backup" with "Vision camera" as category.
• Add calibration sheet for head camera focus.
• Add test files as last step.
• Add MDxxxx number and version number to boot folder for the L3214.
• Improvements to avoid backlash.
• Add driver installers to installation.
• Avoid having to confirm each mark manually in pixel calibration.
• Upgrade file of the L3214 will be published as ZIP archive.

Fixed Issues

• Calibrate head camera focus, detection not successfully done.
• After feeding wait for response not working because the air pressure of the nozzle is switching.
• Feed issue when press the buttons in the mechanical alignment and pixel calibration.
• Path not exist in circle and din test action
• Calibrate pixels squares on the left not cut successfully (Bed size changed 1850 to 1820).
• Actions sets remain disabled after pressing finish when upgrade is done.

 

Download:
Go to Software / Firmware, then select 'software' and 'laser cutters'.